Nissan Accessories and Parts Installation And Review Videos

Yakima Accessories and Parts Review - 2015 Nissan Rogue- Video

Today on our 2015 Nissan Rouge, we have our Yakima Round Bars installed on the vehicle. We're going to be putting on the 38-inch fairing on the front of those. This is going to be part number Y07047. We're going to show you how it's placed on and how it looks. First step is going to be to be to undo the wing nuts on the bottom side and attach the bolts. Once that's done, come up on top and place all these around the bar. This fair is going to help to reduce a lot of your noise and other wind affected sounds that you would normally get. more

5/1/2015 9:51:06 AM

Convert-A-Ball Cushioned Weight Distribution Shank Review - 2010 Nissan Titan BA-1- Video

Today, on our 2010 Nissan Titan, we'll be test fitting the Convert-A-Ball Ball Mount Adapter for the Cushioned Weight Distribution Shank, rated at 5,000 pounds, part number BA-1. We'll begin our test fit by first getting our hitch height. This is the measurement from the ground to the inside top edge of our receiver tube. We have a hitch height measurement of 20-1/2 inches. Now, keep in mind that this measurement may vary depending on tire size, after-market accessories, and the hitch itself. Now, to begin our test fit with our Convert-A-Ball Cushioned Weight Distribution Shank already installed on our vehicle, part number AMAC-1, we'll begin our test fit by inserting the Ball Mount Adapter into the downward part of the distribution shank. We'll then insert the 2 pins and the 2 clips and measure from the ground to the top of the ball platform. more

9/20/2013 3:49:53 AM

Yakima Roof Rack Fairing Review - 2012 Nissan Versa- Video

Today, we have with us the 2012 Nissan Versa and we'll be test fitting the Yakima 44-inch fairing for Yakima roof racks, part number Y07048.We already have our fairing assembled and now we're ready to mount it up on top of our roof rack.To fit the fairing to our cross bar we'll fit all four clips over the cross bar. We'll make sure that the fairing is centered between each of the towers from left to right.Once we've done that, we can take our carriage bolts and wing nuts and tighten down the two clamps on the outside edges of the fairing.With the wing nuts tightened down our fairing is installed and we're ready to hit the road.That does it for our test fit of the Yakima roof rack fairing, part number Y07048 on our 2012 Nissan Versa. more

6/21/2012 12:16:18 PM